Liebert Cooling System XDV - Manual (Page 13)

General product information
7
Removing the Liebert XDV from the Pallet
1. Unfold the unit bag to expose the Liebert XDV.
2. Verify the nameplate information found on the Liebert XDV against the bill of lading. If the
information does not match the product specified, contact your local Liebert sales representative.
3. At least two properly trained personnel may lift the Liebert XDV off the pallet and onto a flat
surface.
4. To protect the Liebert XDV’s paint, lay non-abrasive material, longer than the unit, on the flat
surface before moving the Liebert XDV.
Figure 7 Removing Liebert XDV from shipping pallet
Removing the Liebert XDV
from its shipping pallet
requires two people.