Club information, Changing the club settings – Precor C846 User Manual
Page 15
page 15
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Club Information
These next few pages provide information that lets you customize the C846 for
your Club. It is not information that your customer needs to see. This section
covers the following information about how to:
•
select the units of measure
•
set maximum workout and pause times
•
customize a course
•
display the odometer and other useful information
•
connect to CSAFE compatible devices
Note: If your customers are interested in the learning more about the C846, you
may wish to direct them to the manual available on Precor’s web site
(www.precor.com). (The manual, which appears on the web site, does not con-
tain the information found in this section.)
CHANGING THE CLUB SETTINGS
The Club “custom” settings are accessed through specific codes that help elimi-
nate unauthorized access. Refer to Diagram 9 to locate the keys. Information that
you can access and features that can be customized are as follows:
•
Units of Measure — Select between U.S. Standard and Metric displays.
•
Maximum Workout Time — Sets a maximum limit on workout time.
Note: Remember the additional five minute cool-down period appended to a
completed course, so adjust the maximum time limit accordingly.
•
Maximum Pause Time — Sets the maximum duration for which a person
can “pause” his or her workout.
•
Limiting the Resistance Range— Set specific resistance range (high,
medium, or low) for the cycle.
•
Changing the Custom Course Resistance Settings — Sets specific
resistance settings for a Custom course.
•
Odometer, Hours of Use, Software Version, Error Log and Serial Number —
The C846 stores the cumulative revolutions, the number of hours that the unit
has been in use, the software version and software type (which is valuable when
calling customer support), an error log (useful when troubleshooting) and the
serial number (another valuable item when calling customer support).
To access the Club settings, the following must occur:
❑
Electrical power must be supplied.
The foot pedal speed must be maintained at 20 revolutions per minute. Or,
the optional battery recharger must be plugged into the C846 and connected
to an appropriate power source.
❑
Check that the Precor banner appears on the display and maintain the
minimum pedal speed.
❑
Press the appropriate key sequences.