Precor C846 User Manual
Page 27
page 27
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Numeric Keys (0 - 9): During a workout, a user can press the numeric keys to
change the resistance levels (1 to 25). Remember, if the numeric keys are used to
alter the resistance, the user needs to designate, within three seconds, whether he
or she is
increasing (by pressing the RESISTANCE
▲
key) or
decreasing (by
pressing the RESISTANCE
▼
key), the corresponding resistance level.
Note: When the user presses the numeric keys to change the resistance, the actual
setting appears on the display while the brake is being applied. If the user wishes to
halt the change, the appropriate RESISTANCE
▼
or
▲
key must be pressed. The
brake stops and the display shows the current level.
During the Setup prompts, a user can also use the numeric keys to type in a
course number (1 through 14), workout time, weight, and age. Note that he or she
must press ENTER to process the selection.
CHANGE: During a workout, the CHANGE key lets a user choose which feature
appears on the display.
RESET: While answering the Setup prompts or during a workout, a user can cancel
the course program, clear the display, and return to the banner by pressing RESET.
COURSE CHANGE
▲▼
▲▼
▲▼
▲▼
▲▼
: During a workout, the COURSE CHANGE
▲▼
keys let
the user switch to a different course. When a user taps a COURSE CHANGE
▲▼
key, the course number and name appearing on the display corresponds to the
current course selection. When a user presses and holds a COURSE CHANGE
▲
or
▼
key for a few seconds, the course number and profile changes. The user
can also choose a new course using the numeric keys. For more information,
refer to
Selecting a New Course During a Workout on page 34.
Important: The COURSE CHANGE keys are disabled in the Weight Loss course
and Fitness Test. If a user starts working out and selects the Weight Loss course
or the Fitness Test, he or she cannot “change” to another course. The opposite is
also true. The C846 does not allow any mid-course changes to or from the Fitness
Test or Weight Loss course.
RESISTANCE
▼▲
▼▲
▼▲
▼▲
▼▲
: During a workout, the RESISTANCE
▼▲
keys let the user
decrease or increase the force applied against his or her pedaling. The display
can show a range from 1 to 25. Setting 1 provides the least resistance.
When a user changes the resistance by pressing the RESISTANCE
▼
or
▲
key,
the number that appears on the display shows the
target resistance (not necessar-
ily, the present resistance being applied) because the display can change quicker
than the brake application.
Another feature of the RESISTANCE
▼▲
keys lets the user review the C846
resistance any time during a workout. If RESISTANCE is not one of the chosen
features being displayed, a user can view the actual resistance by lightly touching
either RESISTANCE
▼
or
▲
key. The user can opt to change the resistance if the
key is held down or touched again within two seconds. Note that the numeric keys
can also be used to adjust the resistance.