Pioneer S-HTD330 - Manual (Page 12)

Before you start 01
12
En
• When naming MP3 and WMA files, add
the corresponding file name extension
(.mp3 or .wma). Files are played
according to the file extension. To prevent
noise and malfunctions, do not use these
extensions for other kinds of files.
• This system can recognize up to 999 files
(WMA/MP3) and up to 499 folders. If a
disc exceeds these limits, only files and
folders up to these limits will be playable.
Files and folders are read/displayed in
alphabetical order. Note that if the file
structure is very complex, you may not be
able to read/play all the files on the disc.
• Folder and track names (excluding the file
extension) are displayed.
• There are many different recording bit-
rates available to encode MP3 files. This
system unit was designed to be
compatible with all of them. Audio
encoded at 128Kbps should sound close
to regular CD Audio quality. This system
will play lower bit-rate files, but please
note that the sound quality becomes
noticeably worse at lower bit-rates.
JPEG file compatibility
• Baseline JPEG and EXIF 2.1* still image
files up to 8 mega-pixels are supported
(maximum vertical and horizontal
resolution is 5120 pixels). (*
File format
used by digital still cameras )
• The CD-ROM used to compile your JPEG
files must be ISO 9660 Level 1 or 2
compliant. CD physical format: Mode1,
Mode2 XA Form1. Romeo and Joliet file
systems are both compatible with this
system.
• This system can recognize up to 999 files
(JPEG) and up to 499 folders. If a disc
exceeds these limits, only files and folders
up to these limits will be playable. Files
and folders are read/displayed in
alphabetical order. Note that if the file
structure is very complex, you may not be
able to read/play all the files on the disc.
• Folder and file names (excluding the file
extension) are displayed.
• This system only displays files that are
named with the file extension .jpg or
.JPG.
XV-HDT330_new.book 12 ページ ２００３年１月１６日 木曜日 午後４時１２分