Pioneer S-HTD330 - Manual (Page 26)

Getting started 04
26
En
Chapter 4
Getting started
Switching on and setting up
After making sure everything is connected up
properly, you’re ready to switch on. The first
thing to do is to tell the system what kind of TV
you’re using, standard or widescreen.
After that you can set up the surround sound
for your room, and set the clock so that you
can use the timer features.
1 Press STANDBY/ON (on the remote
or on the front panel) to switch the
system on.
Also make sure that your TV is switched on
and that the video input is set to this system.
You should see the welcome screen
displayed.
2 Press ENTER to move on to the next
screen.
3 Use the / (cursor left/right)
buttons to select either ‘Wide screen’ or
‘Standard size screen’ according to the
kind of TV you have, then press ENTER.
See also Screen sizes and disc formats on
page 83 if you’re not sure which one to
choose.
ENTER
ENTER
STANDBY/ON
ROOM SETUP
SYSTEM SETUP
SHIFT
TIMER
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
Next
Let's Get Started Menu
What kind of TV do you have?
Use the / cursor buttons
to choose, then press ENTER
Wide screen (16:9) Standard size screen (4:3)
XV-HDT330_new.book 26 ページ ２００３年１月１６日 木曜日 午後４時１２分