Pioneer S-HTD330 - Manual (Page 17)

Connecting up 02
17
En
Connecting using the component
video output
If your TV has component video inputs, you
can use these instead of the standard video
output to connect this system to your TV. This
should give you the best quality picture from
the three types of video output available.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
• The component video ouptut is
switchable between interlaced and
progressive formats. See
Component Out
on page 67 for more on this.
Listening to TV audio through this
system
You can connect the audio output of your TV
to this system so that broadcast TV sound is
played through this system.
• Connect a stereo audio cable (not
supplied) from the audio outputs of your
TV to the TV IN jacks on this system.
• If you find that the TV audio is distorting
when played through this system, you can
set the input attenuator to reduce the
input signal level. See
Reducing the TV and
line signal levels on page 78.
S
VIDEO
P R P B Y
COMPONENT VIDEO OUT
CENTER SUB
WOOFER L R
FRONT
S-VIDEO
OUT
VIDEO
OUT
SPEAKERS
TV
XV–HTD 330
COMPONENT
INPUT
AUDIO
ANTENNA
AM LOOP
ANTENNA
FM
UNBAL
75
LINE 1
LINE 2
TV
OUT IN IN
L
R
L
R
COAXIAL IN
TV
XV–HTD 330
AUDIO
OUTPUT
XV-HDT330_new.book 17 ページ ２００３年１月１６日 木曜日 午後４時１２分