Pioneer S-HTD330 - Manual (Page 39)

Home theater sound 05
39
En
• With headphones connected, press
ADVANCED to select ‘Phones Surround’ or
SURROUND to select ‘Stereo’
.
Using the Advanced Surround
effects
Advanced Surround effects can be used with
multichannel or stereo sources for a variety of
additional surround sound effects.
• Press ADVANCED to select an
Advanced Surround mode (or press
ADVANCED then use the
/ (cursor up/
down) buttons).
Press repeatedly to select from:
• Adv. Music – Gives a concert hall-type
sound
• Adv. Movie – Gives a movie theater-type
sound
• Expanded – Creates an extra wide stereo
field
• TV Surr. – Designed for mono or stereo TV
broadcasts and other sources
• Sports – Designed for sports and other
programs based on commentary
• Game – Creates surround sound from
video game sources
• ExPwrSurr. (Extra Power Surround) –
Gives additional energy and width to
stereo sources
• Virtual – Creates the impression of
surround sound from just the front
speakers
• 5ch Stereo – Designed to give powerful
surround sound to stereo music sources
• You can’t use the Advanced Surround
modes with high sampling rate
88.2 / 96 kHz sources.
• You can use any of the above Advanced
Surround modes with any type of source.
The descriptions are given only as a guide.
Adjusting the Advanced Surround
effect level
You can emphasize or reduce the effect of the
Advanced Surround modes as you like. For
each Advanced Surround mode you can set
the effect level independently.
1 With one of the Advanced Surround
modes active, press SOUND MODE.
2 Use the / (cursor left/right)
buttons to select ‘Effect’.
3 Use the / (cursor up/down)
buttons to adjust the effect level.
The effect level can be adjusted from 10 (min)
to 90 (max).
4 Press ENTER to confirm.
ADVANCED
SOUND
MODE
ENTER
XV-HDT330_new.book 39 ページ ２００３年１月１６日 木曜日 午後４時１２分