Reducing the tv and line signal levels, Recording mode, Additional information 12 – Pioneer S-HTD330 User Manual

Page 78

Advertising
background image

Additional information

12

78

En

Connect the COAX IN (LINE 2) jack on

the rear panel to the coaxial digital output
of an external playback component.

These include digital components such as an
MD player, digital satellite, or a game system.
Connect using a coaxial digital cable (not
supplied).

Reducing the TV and line signal
levels

• Default setting:

ATT 6dB

Some sources may produce a high signal
level which may produce unpleasant
distortion from the speakers. In such cases,
you may need to reduce the signal level of the
auxiliary source (connected to the

TV

or

LINE

1

analog inputs) by switching on the

attenuator.

1

Switch the system into standby.

2

Press SYSTEM SETUP (SHIFT + HOME

MENU).

3

Use the

/

(cursor left/right)

buttons to select ‘TV ATT ?’ or ‘LINE1
ATT?’, then press ENTER.

4

Use the

/

(cursor up/down)

buttons to select ‘ATT OFF’, ‘ATT 6dB’ or
‘ATT 10dB’.

If the

ATT 6dB

setting still results in distorted

sound, try the

ATT 10dB

setting.

5

Press ENTER to confirm.

Recording mode

The Recording mode allows you to make
analog recordings from the

LINE 1 (OUT)

jacks.

When Recording mode is on, most sound-
related functions (including

SURROUND

,

ADVANCED

,

AUTO

,

SYSTEM SETUP

)

become inactive. The display will briefly blink

RecMode On

if you try and use a prohibited

function while Recording mode is on.

When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.

1

Press SOUND MODE.

2

Use the Use the

/

(cursor left/

right) buttons to select ‘Rec Mode?’.

3

Press ENTER.

4

Use the

/

(cursor up/down)

buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.

CO

AXIAL IN

LINE 2

XV-HDT330_new.book 78 ページ 2003年1月16日 木曜日 午後4時12分

Advertising
This manual is related to the following products: