Pioneer S-HTD330 - Manual (Page 77)

Additional information 12
77
En
Connecting external antennas
External AM antenna
Use 5–6 meters (15–18 feet) of vinyl-insulated
wire and set up either indoors or outdoors.
Leave the AM loop antenna connected.
External FM antenna
Use 75 Ω coaxial cable to hook up an external
FM antenna.
Connecting auxiliary
components
This system has both stereo analog inputs
and outputs, as well as a coaxial digital input.
Use these to connect external components,
such as your VCR, MD or CD-R recorder.
• Connect the LINE 1 (IN) jacks to the
analog outputs of an external playback
component.
These include components such as a VCR or
cassette deck. Connect using RCA pin-plug
stereo cables. See also
Reducing the TV and
line signal levels below.
• Connect the LINE 1 (OUT) jacks to the
analog inputs of an external recording
component.
These include components such as a
cassette deck, VCR, MD or another recorder
with analog inputs. Connect using RCA pin-
plug stereo cables.
ANTENNA
AM LOOP
ANTENNA
FM
UNBAL
75
Outdoor antenna
15–18 ft. / 5–6m
Indoor
antenna
(vinyl-coated
wire)
ANTENNA
AM LOOP
ANTENNA
FM
UNBAL
75
75 Ω coaxial cable
AUDIO
ANTENNA
AM LOOP
ANTENNA
FM
UNBAL
75
LINE 1
LINE 2
TV
OUT IN IN
L
R
L
R
COAXIAL IN
Tape deck, etc.
XV–HTD 330
AUDIO
OUTPUT
AUDIO
INPUT
XV-HDT330_new.book 77 ページ ２００３年１月１６日 木曜日 午後４時１２分