Pioneer S-HTD330 - Manual (Page 44)

Playing audio and video discs 06
44
En
• Another way to find a particular place on
a disc is to use one of the search modes.
See
Searching a disc on page 51.
Scanning discs
You can fast-scan discs forward or backward
at various different speeds.
1 During playback, press or to
start scanning.
2 Press repeatedly to increase the
scanning speed.
• WMA/MP3 tracks can only be scanned at
one speed.
• The scanning speed is shown on-screen.
3 To resume normal playback, press
(play).
• Sound can be heard while scanning audio
CDs and MP3 discs.
• When scanning a Video CD or WMA/MP3
track, playback automatically resumes at
the end or beginning of the track.
• There is no sound while scanning DVDs,
WMA tracks and Video CDs, and no
subtitles while scanning DVDs.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached on a DVD disc.
Playing in slow motion
You can play DVDs and Video CDs at four
different forward slow motion speeds. DVD
discs can also be played at two reverse
speeds.
1 During playback, press (pause).
2 Press and hold / or / until
slow motion playback starts.
• The slow motion speed is shown on-
screen.
• There is no sound during slow motion
playback.
3 Press repeatedly to change the slow
motion speed.
• The slow motion speed is displayed on-
screen.
4 To resume normal playback, press
(play).
• Video CD only supports forward slow
motion playback.
• The picture quality during slow motion
playback is not as good as during normal
playback.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
Frame advance/frame reverse
You can advance or back up DVD-Video discs
frame-by-frame. With Video CDs and VR
mode DVD-RW discs, you can only use frame
advance.
1 During playback, press (pause).
2 Press / or / to reverse or
advance a frame at a time.
3 To resume normal playback, press
(play).
XV-HDT330_new.book 44 ページ ２００３年１月１６日 木曜日 午後４時１２分