Pioneer S-HTD330 - Manual (Page 70)

Initial Settings menu 11
70
En
This sets whether operation displays are
shown on-screen (
Play , Resume , Scan and so
on.) Note that when set to Off , you won’t be
able to display disc information on-screen.
Angle Indicator
• Default setting: On
If you prefer not to see the camera icon on-
screen during multi-angle scenes on DVD
discs, change this setting to
Off .
Options
Parental Lock
• Default level: Off
• Default password: none
• Default country code: us (2119)
Some DVD Video discs feature a Parental
Lock level. If the player is set to a lower level
than the disc, the disc won’t play. This gives
you some control about what your children
watch on your DVD system.
Some discs also support the Country Code
feature. Certain scenes on these discs will not
be played, depending on the country code you
set.
Before you can set the Parental Lock level or
the Country Code you must register a
password. As the password owner, you can
change the Parental Lock level or Country
Code whenever you like. You can also change
the password.
• Not all discs that you may consider
inappropriate for your children use the
Parental Lock feature. These discs will
always play without requiring the
password first.
• If you forget your password, you’ll need to
reset the system to its factory settings
(see
Resetting the system on page 74),
then register a new password.
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country Code.
1 Select ‘Password’.
2 Use the number buttons to enter a 4-
digit password.
The numbers you enter show up as asterisks
(*) on-screen.
Video Output
Language
Display
Options
OSD Language
On Screen Display
Angle Indicator
On
Off
Initial Settings
Video Output
Language
Display
Options
Parental Lock
PhotoViewer
Password
Level Change
Country Code
Initial Settings
Video Output
Language
Display
Options
Parental Lock: Register Code Number
Initial Settings
* * * *
XV-HDT330_new.book 70 ページ ２００３年１月１６日 木曜日 午後４時１２分