Pioneer VSX-AX5Ai-G - Manual (Page 28)

Connecting your equipment 03
28
En
Installing your speaker system
To take full advantage of the receiver’s surround sound
capabilities connect front, center, surround and
surround back speakers, as well as a subwoofer.
Although this is ideal, other configurations with fewer
speakers—no subwoofer or no center speaker, or even
no surround speakers—will work. At the very least, front
left and right speakers only are necessary. Note that your main surround speakers should always be connected as
a pair, but you can connect just one surround back
speaker if you like (it must be connected to the left
surround back terminal). You can use speakers with a
nominal impedance between 6–16
Ω (please see
Switching the speaker impedance on page 68 if you plan
to use speakers with an impedance of less than 8 Ω ).
S400
S400
CENTER
SELECTABLE
VSX-AX5Ai
Front
left Front
right
Center
Surround
left Surround
right
Surround
back right Surround
back left
LINE LEVEL
INPUT
Subwoofer
TV
Caution
These speaker terminals carry
HAZARDOUS LIVE voltage. To prevent
the risk of electric shock when connecting
or disconnecting the speaker cables,
disconnect the power cord before
touching any uninsulated parts.
VSX-AX5Ai.book 28 ページ ２００４年６月２日 水曜日 午後３時２７分