Using midnight and loudness listening, Using the tone control, Switching the tone control on or off – Pioneer VSX-AX5Ai-G User Manual

Page 46: Adjusting the bass and treble, Listening to your system 05

Advertising
background image

Listening to your system

05

46

En

Using Midnight and Loudness
listening

• Default setting:

Off

The Midnight listening feature makes quieter sounds
more audible, allowing you to hear effective surround
sound at low volume levels.

The Loudness feature boosts the bass and treble in audio
sources, useful for listening at low volumes.

1

Press RECEIVER.

This step is only necessary if you want to use Loudness.

2

Press MIDNIGHT or LOUDNESS to switch the

effect on or off.

The mode you’ve selected lights in the display.

Tip

Multi-voltage model only

– You can also switch

Midnight or Loudness on or off simply by pressing the
corresponding front panel button:

Note

• You can’t use the Midnight and Loudness modes at

the same time.

• You can’t use these modes with

THX CINEMA

,

MULTI CH IN

or

SACD DIRECT

.

• These modes automatically adjust according to the

volume at which you’re listening. However, the
volume must be under -20dB for these features to
take effect.

• You can’t use these modes with sources over 96kHz

(including SACD in some cases) when using one of
the digital inputs (including i.LINK).

• If you switch on either of these modes when

DIRECT

is selected, the receiver automatically switches to

STEREO

.

Using the tone control

You can use the tone control to make customized
settings for the bass and treble.

Switching the tone control on or off

• Default setting:

Off

You’ll need to switch the tone control on to adjust the
bass and treble below.

1

If you’re using the remote, press RECEIVER.

2

Press TONE to switch the tone control on or off.

TONE

shows in the display when the tone control is

switched on.

Adjusting the bass and treble

• Default setting: Bass:

0

,

Treble:

0

You can adjust the bass and treble controls separately to
adjust the overall tone.

1

Press BASS/TREBLE repeatedly to select BASS or

TREBLE.

If you see

TONE:BYPASS

in the display, the tone control

needs to be switched on (see above).

2

Use the +/– buttons to adjust the sound.

The bass and treble can be adjusted from

–6

to

+6

.

LOUDNESS

RECEIVER

MIDNIGHT

MIDNIGHT

LOUDNESS

TONE

BASS/TREBLE

RECEIVER

+

VSX-AX5Ai.book 46 ページ 2004年6月2日 水曜日 午後3時27分

Advertising
This manual is related to the following products: