06 using the tuner, Finding a station, Tuning directly to a station – Pioneer VSX-AX5Ai-G User Manual
Page 48: Using the tuner, Using the tuner 06, Chapter 6
Using the tuner
06
48
En
Chapter 6
Using the tuner
Finding a station
The following steps show you how to tune in to FM and
AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the
exact frequency of the station you want to listen to, see
Tuning directly to a station
below. Once you are tuned to
a station you can memorize the frequency for recall
later—see
Memorizing station presets
below for more on
how to do this.
1
Press TUNER, then press BAND to change the
band (FM or AM), if necessary.
Each press switches the band between FM and AM.
• You can also use the front panel
MULTI JOG
dial to
select the tuner.
2
Tune to a station using the TUNING +/– buttons.
On the front panel, press
SELECT
first to switch to the
frequency select mode for (
STATION
)
TUNING +/–.
Automatic tuning
To search for stations in the currently selected band,
press and hold either of the
TUNING +/–
buttons for
about a second. The receiver will start searching for
the next station, stopping when it has found one.
Repeat this step to search for other stations.
Manual tuning
To change the frequency one step at a time, press the
TUNING +/–
buttons repeatedly.
High speed tuning
Press and hold the
TUNING +/–
buttons for high
speed tuning, releasing the button once you reach
the frequency you want.
Tuning directly to a station
Sometimes, you'll already know the frequency of the
station you want to listen to. In this case, you can simply
enter the frequency directly using the number buttons on
the remote control.
1
Press TUNER, then press BAND to change the
band (FM or AM), if necessary.
Each press switches the band between FM and AM.
2
Press DIRECT ACCESS.
3
Use the number buttons to enter the frequency
of the radio station.
For example, to tune to 106.00 (FM), press
1
,
0
,
6
,
0
,
0
.
Note
• If you make a mistake while inputting the frequency,
press the
DIRECT ACCESS
button again to cancel the
frequency and start again.
SETUP
TUNER
TUNING
BAND
TUNING
+
1
5
9
0
6
7
8
3
4
2
DIRECT ACCESS
TUNER
BAND
VSX-AX5Ai.book 48 ページ ２００４年６月２日 水曜日 午後３時２７分