Pioneer VSX-AX5Ai-G - Manual (Page 64)

Controlling other equipment 08
64
En
4 Use / (cursor up/down) to select a command
in the sequence then press ENTER.
If this is the first command in the sequence, select 1st
Cmmnd . Otherwise, simply choose the next command in
the sequence.
5 To add (or change) a command select ‘Change’
and press ENTER.
Function
flashes in the display.
• To erase a command select Clear and press ENTER .
You will return to the last step.
• To go back a step, select *Exit* and press ENTER .
6 Press the MULTI CONTROL button for the
component whose command you want to input.
Key
flashes in the display.
7 Select the button for the command you want to
input.
The following remote control commands can be
selected:
• After selecting a command, COMPLETE appears in
the display.
8 Repeat steps 4–7 to program a sequence of up to
five commands.
• You don't need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components , you don’t need to:
• program the power to switch off in a shutdown
sequence;
• program the power to switch on if it’s the source
component selected in step 3;
• program a Pioneer TV or monitor to switch on if the
input function (selected in step 2) has video input
terminals;
These take priority in multi operations (not shutdown).
9 When you’re finished, use / (cursor up/down)
to select ‘*Exit*’ from the menu and press ENTER.
You will return to the REMOTE SETUP menu. Select
*Exit* again to exit.
Using multi operations
You can start multi operations with the receiver switched
on, or in standby.
1 Press MULTI OPERATION.
Select Function flashes in the display.
2 Press a function button that has been set up with
a multi operation.
The receiver switches on (if it was in standby) and the
programmed multi operation is performed automatically.
SOURCE
DIMMER LOUDNESS TONE
SIGNAL SEL DNR
DISC
1
5
9 0
6 7 8
3 4 2
BASS/TREBLE
VIDEO SEL HI-BIT
DIRECT ACCESS SEARCH MODE
ENTER
GUIDE SYSTEM SETUP
TUNER EDIT
MPX
TUNING BAND
DISP MODE
TUNING
STATION STATION
CHANNEL
SUB TITLE
ENTER
TOP MENU MENU
AUDIO RETURN
TRACK
EXIT
+10
+
+
+ CHANNEL
+
EFFECT/CH SEL
TV
TV VOL
TV CONTROL
TV CH
TV INPUT
MIDNIGHT
MULTI DH
INPUT
SB CH
MODE STEREO/
DIRECT
+
+
TEXT ON RF ATT
TEXT OFF CLASS
DVD/LD
VCR2 VIDEO CD
TV/SAT TV CONT
MULTI CONTROL
VCR1 /
DVR
CD-R/ TAPE1 MD/ TAPE2
MULTI OPERATION
TUNER
VSX-AX5Ai.book 64 ページ ２００４年６月２日 水曜日 午後３時２７分