Panasonic WJ-HD100 - Manual (Page 36)

37
T: Alarm terminal was activated.
V: VMD was activated.
Asterisk *: Corresponding alarm picture is recorded on
the disk.
No asterisk: Alarm was logged, but no picture was
recorded.
4. Press the [B PLAY] button to play it back.
Note: Make certain to rotate the JogDial one click at a
time.
● Alarm History Search
ALARM RECALL 1 OF 10
NO DATE TIME ALM
99 JUN 9.00 00:00:00 * T
98 JUN 1.00 02:34:56 T
97 JUN 1.00 01:10:01 * V
96 MAY31.00 23:34:45 V
95 MAY30.00 02:00:20 * T
94 MAY14.00 05:30:31 * T
93 MAY 7.00 23:00:59 T
92 MAY 6.00 22:05:50 V
91 APR14.00 23:00:59 * T
90 APR14.00 16:06:34 * V
DISPLAY SELECT STOP PLAY REC
PUSH– PAUSE SET
ALARM SEARCH STEP REW/FF
PLAY MODE SELECT
/ /
/ /
SETU/ESC
LCD CONTRAST
Digital Disk Recorder WJ-HD
1,6 2, 3, 7 5 4
1. Press the [STOP] button.
2. Press the LCD button downward to display the date
and time on the LCD.
3. Hold down the LCD button center for 2 seconds.
The monitor displays the ALARM RECALL list. The line
highlighted on the monitor is also displayed on the
LCD.
4. Select the desired alarm event by rotating the JogDial
or pressing the up [▲] and down [▼] buttons.
5. Press the [B PLAY] button. The searched picture is
played back.
6. Press the [■ STOP] button to stop playback.
ALARM RECALL appears on the monitor.
7. Hold down the LCD button center for 2 seconds to quit
alarm history search.