Panasonic WJ-HD100 - Manual (Page 6)

6
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■ Front View
OPERATE
TIMER HDD
ALARM
SUSPEND
DAYLIGHT
SAVINGS
FULL
LOCK
MEMORY CARD DISPLAY SELECT STOP PLAY REC
PUSH– PAUSE SET
ALARM SEARCH STEP REW/FF
PLAY MODE SELECT
/ /
/ /
SETUP/ESC
q w e
r
t y u i o !0 !1 !2 !3 !4
!5 !6 !7 !8
LCD CONTRAST
Digital Disk Recorder WJ-HD
q Operate Indicator [OPERATE]
Lights while the power switch on the rear is turned on.
w Timer Record Reservation Indicator [TIMER]
Lights when a reservation is made for internal timer
recording.
e Alarm Suspension Indicator [ALARM SUSPEND]
Lights when an alarm is activated while alarm suspen-
sion is selected. The alarm will be logged in the event
history, but recording is suspended and the buzzer will
not sound.
r Daylight Saving Button [DAYLIGHT SAVINGS]
Press the recessed button with a pin to advance the
internal clock by one hour to daylight saving time, or to
set it back to normal time. While the clock is on day-
light saving time, an asterisk * appears in the time and
date display on the LCD and on the video monitor.
t HDD Access Indicator [HDD]
Lights while the disk is being accessed.
y Full Indicator [FULL]
Blinks when the remaining disk capacity reaches the
preset value, and lights when the disk is full.
u Lock Indicator [LOCK]
Lights when buttons and JogDial on the front panel are
disabled.
i Memory Card Slot [MEMORY CARD]
Open the lid to insert the CompactFlash card into the
slot or to remove it from the slot. The card is used to
store still pictures for browsing through them on a per-
sonal computer.
o LCD
Displays setup parameters while working with menus,
or the operating status while recording or playing back.
!0 LCD Button [DISPLAY SELECT]
There are five positions to press; up, down, left, right
and center. Press the appropriate positions to select a
parameter on the LCD.
!1 LCD Contrast Control [LCD CONTRAST]
Adjust the LCD contrast by rotating the control knob
with a small screw driver.
!2 Stop and Setup/ Escape Button
[
■ STOP] [SETUP/ESC]
Pressing this button in any mode other than menu setup
stops recording or playback.
Holding down this button for 2 seconds calls up setup
menus or escapes from the setup.
Press this button to go back one step to the previous
selection in the setup menu.
!3 Play Button [ 5 PLAY]
Press this button to start playback. The LED lights while
playing back, and blinks while pausing or searching.
!4 Recording Button [ ● REC]
Press this button to start recording. The LED lights while
recording, and blinks while alarm recording.
!5 to !7 are PLAY MODE SELECT buttons that also specify
the JogDial performance in the selected play mode. See
pages 35, 36 and 37 for further details.
!5 Alarm Search Button [ALARM SEARCH]
Press this button to search for a desired record in the
alarm log. The LED lights in the alarm search mode.
!6 Step and Down Button [STEP A ❚❚/❚❚B ] [ C ]
Press this button to start playing back still pictures field
by field. The LED lights in the step playback mode.
Press this button to move the cursor downward in a
setup menu on the monitor.