Panasonic WJ-HD100 - Manual (Page 52)

• Using a graphics application
A copied picture consists of 640 horizontal and 240 vertical lines. You may need to adjust the height and width measure-
ment when a too wide window appears.
• Using the Viewer.htm
1. Start up an internet browser compatible with HTML version 4.0 or later on your computer.
2. Open the Viewer.htm file. Pictures will appear on your computer display in Thumbnail and Play mode.
<Thumbnail Mode Display>
Click on the desired thumbnail to display it in zoomed size
overlaying the window.
Selecting numbers in SKIP and ID columns can also dis-
play a zoomed picture only if the copied pictures are
derived from a Video Multiplexer.
SKIP: Enter the total number of cameras connected to
the Video Multiplexer.
ID: Enter a camera ID to magnify the picture on the dis-
play.
Note: There may be a difference between the designat-
ed ID and the camera ID connected with the Video
Multiplexer.
<Play Mode Display>
At first the play mode area displays a picture that is placed
in the upper left corner of the thumbnails. Retrieve and view
the copied pictures with the buttons below.
STEP FORWARD : Press this button to advance the
display a frame.
PAUSE: Press this button to pause the playback.
PLAY: Press this button to continuously play back the
copied pictures.
STEP BACKWARD: Press this button to go back by
one frame on the display.
FRAME No.: Enter a frame number you wish to start
playing back, then press the PLAY button.
Notes:
• You can see dark stripes in the upper and left edges of each picture on the display. These are added by the WJ-HD100 for
the administration purposes.
• Pictures may not be displayed in adjusted sequence if any of the following took place on the Video Multiplexer while
recording.
* Pictures while the Video Multiplexer ran without CAM SW IN signal
* Alarm recording pictures in Priority or Group mode
* Blackout pictures (secret view) in full screen or in any segment of a multi-screen
2