Panasonic WJ-HD100 - Manual (Page 40)

41
1. Enter your password with the JogDial while listening to
the number of beeps because the password is hidden
on the LCD or monitor. The rules are as follows:
• Each password has an invisible leading "0".
• 2 beeps stand for "2" when turning the JogDial clock-
wise.
• 2 beeps stand for "0" when turning the JogDial counter-
clockwise.
• Turning the JogDial further counter-clockwise beyond
"0", or clockwise from "9" will have no effect.
2. Press the JogDial to move the cursor to the next digit.
3. Repeat steps 1 and 2 for the remaining digits.
The recorder allows access to the front panel controls if
the correct password is entered and a button operation
takes place within 5 minutes of password entry.
■ Lock/Unlock Buttons
● Password Verification
The password prompt is displayed on the LCD and on the
monitor when a locked button is pressed.
Try again when Password Error appears on the LCD, or
press the LCD button to quit password verification.
PASSWORD / - ----
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST
• • • • •
● Enabling Button Lock
KEY LOCK DONE!
DISPLAY SELECT STOP PLAY REC
PUSH– PAUSE SET
ALARM SEARCH STEP REW/FF
PLAY MODE SELECT
/ /
/ /
SETU/ESC
LCD CONTRAST
Digital Disk Recorder WJ-HD
1, 2
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST
1. Press the LCD button downward to display [Key Lock]
on the LCD.
2. Press the LCD button to the right or left to display
“PUSH [DISPLAY]” on the LCD, then press the LCD
button center.
This enables button lock mode.
Note: Set PASSWORD LOCK to OFF if you do not want
the recorder to revert to button lock mode when no
operation takes place within 5 minutes. See page
22 for details on PASSWORD LOCK.