Powerware E.T.N 1500 VA - 60kVa - Manual (Page 71)

9 www.powerware.com 1.800.356.5794
Eaton’s connectivity products are accessory hardware options used to provide Powerware UPS products to external communication devices. We
offer a variety of connectivity products to ensure communication compatibility with a variety of external devices through the Web, serial, USB, relays,
or SNMP.
ConnectUPS Web/SNMP Devices
SOLUTIONS FOR THE CHANGING GLOBAL CUSTOMER LANDSCAPE
The ConnectUPS-X, ConnectUPS-BD, and ConnectUPS-E Web/SNMP devices are designed for the
rigorous task of managing the UPS that protects equipment and the critical data residing throughout
the network.
Powerware Expansion Chassis & Modbus Card
INCREASING THE FLExIBILITY OF UPS MONITORING & MANAGEMENT
The Expansion Chassis is a three-slot peripheral device that expands communication methods for a UPS through its support for X-Slot cards. It is pre-
configured with the Powerware Modbus card, which serves as the interface to Modbus networks and as the integral communications controller for
the other two slots.
Multi-Server Card & Relay Interface Cards
OUT-OF-BAND COMMUNICATIONS AND NOTIFICATION
OF UPS ALARM STATUS
The Multi-Server Card provides out-of-band serial communications with Powerware LanSafe software when Ethernet connectivity is not available
or required. Load segment control is mapped to specific serial ports on the card to provide selective control over critical loads. The Relay Interface
Cards provide simple alarm notification via isolated contacts to signal remote alarm panels or security systems in the event of a change of state in
UPS operation.
CONNECTIVITY
Connectivity Products
Features and Benefits
• Monitoring via Web (computer, PDA, or cell phone) or via SNMP (Network
Management System) provides easy, anytime, anywhere access
• Built-in three port switching hub (in X-Slot version) adds three
10/100 Mbps power connected network connections with no additional
expense
• Alarm notification through any combination of e-mail, SNMP traps, or
network message speeds corrective action
• Integrated NetWatch Client software provides graceful, unattended
shutdown of computer operating systems in the event of an extended
power failure
• Powerware MultiView software provides simultaneous UPS monitoring
through multiple ConnectUPS-X, -BD, and -E cards from a single computer
console
• SSL and SSH encryption and authentication
• Automatic local language detection and support; Spanish, Chinese,
German, Italian, French, and Portuguese among others
Features and Benefits
• Creates an array of communication options for Powerware UPSs
• Serves as the framework for protocol conversion via compatible X-Slot
cards to: Modbus, SNMP, and HTTP
• Add expanded communication support for a wide range of UPS models:
Powerware 5115, 5125, 9120, 9125, 9170+, 9315, and 9355
• Flexible mounting options (via included feet, rack or wall-mounting kits);
redundant power inputs
• Alarm notification speeds corrective action through any combination of
e-mail, SNMP traps, or NetWatch Client software
• Compatible with X-Slot cards: Modbus Card (one included), ConnectUPS-X
Web/SNMP Card, Single Port Serial Card, and Multi-Server Card
Features and Benefits
• Provides out-of-band communication methods via RS-232 serial
communications or isolated Form-C relay contacts
• Multi-Server Card connects up to three servers for monitoring and
graceful shutdown; supports load segment control and RS-232 signals for
low battery and AC Fail
• Relay Interface Card provides isolated dry contact Form-C relay outputs
for Utility failure, Low battery, UPS alarm/OK, and On bypass
• User-selectable normally open (NO) or normally closed (NC) contacts
• Shutdown function to remotely shutdown UPS in the event of an
emergency
• IBM AS/400 computer port (DB-15)
• Terminal block outputs available on X-Slot card
• Works with any Powerware UPS equipped with an X-Slot communication
bay, in addition to the Powerware 9120 and Powerware 9170+