Printronix Integrated Network Interface Card User Manual
Page 157
Setting Up Printing For ASCII Files
153
Figure 39. Automatic Remote Output Queue Configuration
3.
Enter values for the following parameters:
Output Queue (OUTQ)
The name of the AS/400 output queue. The name can be
anything you would like. This name is not the same as the
printer internal queue name, ‘d1prn’.
Remote System (RMTSYS)
Internet address of the NIC on the printer (*INTNETADR
prompts you for this) or the hostname of the NIC.
Remote Printer Queue (RMTPRTQ)
Default name of the network printer. Set for any of ‘d1prn’
through ‘d8prn’. The remote printer queue name must be
lowercase, entered in single quotes.
NOTE:When the IPDS feature is installed, queue name
‘d4prn’
is not available.
Writer to Autostart (AUTOSRTWTR)
Set the value to 1. This will start the Remote Writer when the
queue is created, and it automatically starts the Remote Writer
after each IPL of the AS/400 and whenever STRTCP is started.
Workstation Customizing Object
WSCST
>
(See Note on
page 150)
Library
Internet address
INTNETADR
>
‘9.99.57.173’
Destination options
DESTOPT
*NONE
Print separator page
SEPPAGE
*YES
User defined option
USRDFNOPT
*NONE