Printronix Integrated Network Interface Card - Manual (Page 224)

Chapter 12 Complete Command List
220
Define the wireless authentication scheme:
store ifc <IFNUM> wlan auth <AUTH-METHOD>
(eg. open, shared, leap)
<ifnum> is the interface number for the wireless interface.
• “Open” system authentication allows all devices that have the
authentication algorithm number for open system to
authenticate.
• “Shared” key authentication involves a four step process using
secure or encrypted text by means of WEP.
• “Leap” is to enable/disable LEAP operation.
Define a wireless auth-user-name to be used in the LEAP
operation:
store ifc <IFNUM> wlan user <AUTH-USER-NAME>
<ifnum> is the interface number for the wireless interface.
This auth-user-name needs to match the user name entered in
the LEAP Access Point.
Define a wireless auth-password to be used in the LEAP operation:
store ifc <IFNUM> wlan pass <AUTH-PASSWORD>
<ifnum> is the interface number for the wireless interface.
This auth-password needs to match the password entered in
the LEAP Access Point.
Set the wireless network name (SSID):
store ifc <IFNUM> wlan ssid <NETWORK-NAME>
<ifnum> is the interface number for the wireless interface.
<network-name> is a 1 to 32 ASCII character string.
Set the wireless network mode:
store ifc <IFNUM> wlan mode adhoc|pseudo|managed
<ifnum> is the interface number for the wireless device.
"pseudo" or "managed". "pseudo" stands for pseudo IBSS
(Proprietary adhoc).