Printronix Integrated Network Interface Card - Manual (Page 188)

Chapter 8 Sharing The AS/400 Printer On The Network
184
V3R7
V4R1 CRTPSFCFG
CHGPSFCFG RLSTMR *SEC15 Specifies the amount of
time to wait before a
session or dialog is
released without
terminating the writer.
The ACTRLSTMR
parameter specifies
when this timer is to be
activated. Set the
parameter to a value at
least equal to the
TIMEOUT value on the
printer. The
recommended value is
*SEC15.
V3R7
V4R1 CRTDEVPRT
CHGDEVPRT ACTTMR *NOMAX The value specifies the
number of seconds that
PSF/400 will wait for a
printer to respond to an
activation request. If
only one system will be
using the printer, use
the default value (170
seconds). If more than
one system will be
using the printer, set the
value to *NOMAX,
which causes PSF/400
to wait indefinitely for a
response to an
activation request.
Table 5. Printer Sharing (continued)
AS/400
Version
Where Set Parameter
Recommended
Value
Description