Printronix Integrated Network Interface Card - Manual (Page 169)

Configuring PSF/400 For IPDS On V3R2
165
g. Font (FONT)
Enter an appropriate value.
h. Form Feed (FORMFEED)
Specify *CONT.
i. Remote Location (RMTLOCNAME)
Enter the remote location name.
Configuring AFP With CRTPSFCFG On V3R2
The PSF™ configuration object created with this command is used
by PSF/400 when printing IPDS files. The object is used by AS/400
V3R2 only if the object is in the QGPL library and has the same
name as the printer device description. This information overrides
the APPC configuration information specified in the printer device
description.
To configure AS/400 for IPDS printing on V3R2:
1. At the AS/400 command line, enter a command in the form:
CRTPSFCFG PSFCFG(printer_type IPDSPASTHR(*YES)
RLSTMR(*SEC15) TEXT(‘printer_type NETWORK
PRINTER’) RMTLOCNAME(‘128.99.12.134’)
PORT(5001)
where printer_type (e.g., T5000, P5000, L5520) is the
model of your printer.
2. A completed screen looks like Figure 42.
PSF configuration: printer_type Library: QGPL
User resource library: *JOBLIBL
IPDS pass through: *YES
Activate release timer: *NORDYF
Release timer: *SEC15
Restart timer: *IMMED
SNA retry count: 2