Printronix Integrated Network Interface Card - Manual (Page 215)

Getting Started
211
Figure 51. Example of CHGDEVPRT Command
Font Identifier (FONT) - Help
The print quality/typeface setting in TN5250 mode is NOT set by
the TN5250 data stream. It is only set through the front panel. This
is true regardless of the front panel TN5250 Host Override setting.
Text ‘description’ TEXT ‘Device created for
S1045PXM.’
Workstation customizing object WSCST *NONE
Library
Specifies the font identifier used by the 3812, 3816, and 5219 printers (including ASCII
printers emulating the 5219 printer), and the IPDS printers.
The Printer Font Table (Font Parameter) in the CRTDEVPRT command lists the valid
font identifiers, the display values, the characters per inch value implied with each font
style, a description of each font style, and whether the font is supported on a particular
printer.
NOTE: Some fonts may be substituted by the printer. Consult the various printer
reference guides of details.
The possible values are:
• identifier. Specify the 3-, 4-, or 5-digit identifier associated with this printer.
• point-size. Specify a point size ranging from 0.1 through 999.9. If you do not
specify a point size, the system will set one.
• *SAME. This value does not change.
Font Identifier (FONT) - Help