Panasonic KX-FLM600 - Manual (Page 101)

101
Copier
PC
Software
PC based copying !
4 Enter the number of copies required in
Number of copies.
5 If necessary, change the setting of
Enlarge-Reduce.
6 Click [Start] .
≥ The Scan dialog box will appear.
FACE DOWN
1 Set the document which you are going to copy
in the fax machine.
2 Open the PANA LINK main panel.
3 Click [Copy] in the main panel.
≥ The Copier dialog box will appear.
7 If necessary, change the setting of Image
Quality, Image Type and Brightness.
8 Click
[Scan]
.
≥ The fax machine will start scanning the
documents, then will print the copies.
Note:
≥ While scanning, do not move the pages which
have already ejected. A paper jam may occur.
Allow the scanning process to finish before
viewing documents.
≥ To cancel copying while the document is being
scanned, press
(STOP)
on the fax machine.