Panasonic KX-FLM600 - Manual (Page 78)

78
Receiving Faxes
Pager call - when your unit receives a fax !
This feature allows your unit to call your pager when your unit receives a fax document.
MENU
START/SET/COPY
(REDIAL/PAUSE)
(MONITOR)
(Pause)
/
FA X ON
AUTO ANSWER
ON (RED)
How your unit and pager work
When your unit receives
a fax document, it will call
your pager company. Your pager
company will
call your pager.
Pager
company
5555
Pager
A few minutes later,
your pager will display the
same message you
entered in step 6 above.
(For example: 5555)
1 Press (MENU) .
Display:
2 Press
(#)
, then
(7)(0)
.
3 Press (START/SET/COPY) .
4 Press or to select “ON”.
≥ If this feature is not required, select “OFF”.
5 Press
(START/SET/COPY)
.
6 Enter your pager number.
≥ You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP5555#
NO.=
MODE=ON ▼▲
MODE=OFF ▼▲
FAX PAGER CALL
1.SYSTEM SET UP
1 7 Press (START/SET/COPY) .
≥ The unit will dial the stored pager
number.
1 8 Confirm if the message is displayed on
your pager.
1 9 Press (MONITOR) .
10 If the AUTO ANSWER light is off, turn it
on by pressing
(AUTO\ANSWER)
.
PAGER TEST
Your pager access
code, if required.
Pauses
Your pager
number
Message you want
to display on your
pager when your
unit receives a fax.