Panasonic KX-FLM600 - Manual (Page 93)

93
PC Fax
PC
Software
Sending documents created on the PC !
Sending a document created by an application as a fax
message
You can access the fax function from a Windows application by using the Print command in the File menu.
Select PANA LINK FAX as the active printer.
For example, to send a document created from Microsoft Word, proceed as follows.
1 Open the document you want to send.
2 Select Print from the File menu.
≥ The Print dialog box will appear.
3 Select PANA LINK FAX as the active printer.
4 Click
[OK]
in the Print dialog box.
≥ If the PANA LINK application has not started
yet, it will start now, and then one item is
added to it as the transmission document.
5 Set the fax number you want to send the
document to.
≥ To set the telephone number, you can use
the keypad, one-touch dialing or the address
book.
6 Click
[START]
in the main panel.
≥ The document will be sent.
Keypad
One-touch
dialing
Address book
Note:
≥ If the line is busy or there is no answer, the PANA
LINK Fax will automatically redial the number up
to 5 times.
≥ To cancel transmission after dialing, click [STOP]
in the main panel.
≥ If you send a fax using a PC, the FaxSav service
cannot be used (p. 46).
≥ When you click
[START]
to send the selected file,
any document set on the fax machine will also be
sent at the same time.