Panasonic KX-FLM600 - Manual (Page 80)

80
Copying
Making a copy !
The unit can make single or multiple copies (up to 99). Any transmittable document (p. 49) can be copied.
1 Open the document feeder tray.
2 Adjust the width of the document guides to the size
of the document.
3 Insert the document (up to 15 pages) FACE DOWN
until the unit grabs the document and a single beep
is heard.
Display:
≥ Make sure the handset is on the cradle.
4 If necessary, press (RESOLUTION) repeatedly to
select the desired setting (p. 43).
5 Press
(START/SET/COPY)
.
6 Enter the number of copies (up to 99).
7 If necessary, choose an enlargement/reduction rate
by rotating
(JOG\DIAL)
. See next page.
8 If you want to print collated copies, press
(COLLATE)
until the following is displayed (see
next page).
9 Press (START/SET/COPY) .
OR
Press
(QUICK\SCAN) if you want to remove the
copy document for other uses.
≥ The unit will feed the documents and scan them
into memory, then start printing.
COLLATE=ON
NUMBER=1 [100%]
STANDARD
Document guides Document
feeder tray
(RESOLUTION)
(START/SET/COPY)
(STOP)
FACE DOWN
(JOG\DIAL)
(COLLATE)
(QUICK\SCAN)
To stop copying
Press
(STOP)
.
Note:
≥ While scanning, do not move the pages
which have already ejected. A paper jam
may occur. Allow the scanning process to
finish before viewing documents.
≥ If a resolution is not selected, FINE
resolution will automatically be selected.
≥ Once copying has started, the resolution
cannot be changed.
≥ You can make or receive a voice call while
making copies.
≥ After copying, the enlargement/reduction
rate setting will return to “100%”.
≥ Manual feeding is not available when
making a copy.