Panasonic KX-FLM600 - Manual (Page 129)

129
Specifications
General
Information
Technical data about this product !
Common specifications
Laser diode properties: Laser output: 5 mW max
Wave length: 760–800 nm
Emission duration: Continuous
Operating Environment: 10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 80 % RH (Relative Humidity)
Dimensions (H t W t D): 422 mm k 430 mm k 212 mm (16 5 ⁄
8 qk 16 15 ⁄
16 qk 8 11 ⁄
32 q )
Mass (Weight): Approx. 12.2 k g (26.9 lb.)
Power Consumption: Standby: Approx. 40 W
Power save*: Approx. 10 W
Transmission: Approx. 12 W (Power save)
Approx. 42 W (Standby)
Print (Copy or Reception): Approx. 200 W
Maximum:
Approx. 480 W
Power Supply: 120 V AC, 60 Hz
* If this product is not used for 5 minutes, it will change to power save mode.
Fax/Copy feature
Applicable Lines: Public Switched Telephone Network
Document Size: Max. 216 mm (8 1 ⁄
2 q ) in width
Max. 600 mm (23 5 ⁄
8 q ) in length—STANDARD/FINE/HALF TONE mode
Max. 420 mm (16 17 ⁄
32 q ) in length—SUPER FINE mode
Effective Scanning Width: 208 mm (8 3 ⁄
16 q )
Effective Printing Width: 208 mm (8 3 ⁄
16 q )
Transmission Time*: Approx. 8 s/page (ECM-MMR)**
Scanning Density: Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch) —STANDARD mode
7.7 lines/mm (196 lines/inch) —FINE/HALF TONE mode
15.4 lines/mm (392 lines/inch) —SUPER FINE mode
Halftone Level: 64-level
Scanner Type: CIS (Contact Image Sensor)
Printer Type: Laser beam printer
Data Compression System: Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
Modem Speed: 14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Memory Capacity: Approx. 120 pages of memory transmission/reception/copy
(Based on the CCITT No. 1 Test Chart in standard resolution.)
CCITT No. 1 Test Chart
* *Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the
receiving unit.
**The 8 second speed is based upon the CCITT No. 1 Test Chart.