Panasonic KX-FLM600 - Manual (Page 50)

50
Sending Faxes
MENU
START/SET/COPY
/
1 Press
(MENU)
.
Display:
2 Press (#) , then (0)(4) .
3 Press
(START/SET/COPY)
.
4 Press or to select the desired setting.
5 Press (START/SET/COPY) .
6 Press
(MENU)
.
SETUP ITEM [ ]
MODE=ERROR ▼▲
SENDING REPORT
1.SYSTEM SET UP
Sending report for confirmation !
The sending report will provide you with a printed record of the fax transmission result.
One of the following choices is available.
ERROR: The sending report will print out only when fax transmission fails (pre-selected setting).
ON:
The sending report will always print out, indicating whether fax transmission is successful or not.
OFF: The sending report will not print.
01 2345678 00'51 SND 00 COMMUNICATION ERROR (43)
Jan. 20 1999 01:19PM
Jan. 20 01:18PM
SENDING REPORT
CODE NO. USAGE TIME MODE PAGES START TIME RESULT OTHER FACSIMILE
Sample of a sending report
Communication
message (p. 105) Error code
(for service
personnel
use only) SND: Sent directly.
IQ-FAX: Sent to the fax
server.
Note:
≥ If your fax is not transmitted to the other party’s fax machine when using the FaxSav network, the FaxSav
network will send a Non-Delivery Notice to your unit.