Panasonic KX-FLM600 - Manual (Page 52)

52
Sending Faxes
1 1 Insert the document FACE DOWN until the unit
grabs the document and a single beep is
heard.
Display:
1 2 Press (MENU) .
1 3 Press
(#)
, then
(2)(5)
.
1 4 Press
(START/SET/COPY)
.
1 5 Press or to select “ON”.
1 6 Press
(START/SET/COPY)
.
1 7 Enter the fax number using the dial keypad,
One-Touch Dial or
(JOG\DIAL) .
1 8 Press
(START/SET/COPY)
.
1 9 Enter the transmission start time. Press
($)
to
select “AM” or “PM”.
Example (using the dial keypad): 11:30PM
Press
(1)(1)(3)(0) , then press ($) until “PM” is
displayed.
10 Press (START/SET/COPY) .
11 Press
(MENU)
.
≥ At the programmed time, the unit will
automatically start transmission.
SEND AT 11:30PM
SETUP ITEM [ ]
TIME=11:30PM
TIME=12:00AM
FAX=
MODE=ON ▼▲
MODE=OFF ▼▲
DELAYED SEND
1.SYSTEM SET UP
STANDARD
(START/SET/COPY)
FACE DOWN
(JOG\DIAL)
One-Touch
Dial keys
(STOP)
(MENU)
/
Note:
≥ While scanning, do not move the pages which
have already ejected. A paper jam may occur.
Allow the scanning process to finish before
viewing documents.
≥ You can receive, transmit and copy
documents while delayed transmission is set.
Delayed transmission !
(sending a fax at a specified time)
Using a built-in clock, this unit can send documents automatically at a specified time. This allows you to take
advantage of low-cost calling hours offered by your telephone company. The delayed transmission can be
reserved to take place up to 24 hours in advance.
To cancel the delayed
transmission setting
1. Press
(STOP)
while the unit is idle.
Display:
2. Press (START/SET/COPY) .
YES: PRESS SET
SEND CANCELED?