Pioneer Elite VSX-53TX - Manual (Page 12)

Easy Setup Guide Part 1
12
3 Setting up the Main Unit
1 Plug the AC power cord into a wall outlet.
2 Press the  STANDBY/ON button to switch the receiver ON.
4 Assigning the Digital Inputs
This is only necessary if you did not hook up your DVD player to DIGITAL IN 3 using a coaxial cable but
rather connected it to one of the optical digital inputs. The following example shows how to assign the
DIGITAL IN 2 jack to DVD.
1 Turn on the receiver and your TV,
press the RECEIVER button on the
remote control.
2 Press the SYSTEM SETUP button.
The SYSTEM SETUP menu appears on your TV (if it
doesn't, refer to page 10 to make sure you have prop-
erly connected the receiver to your TV).
3 Looking at the on-screen display on
your TV, use the  buttons to
select INPUT ASSIGN. Press the
ENTER button.
4 DIGITAL IN-SELECT should be
selected, if not use the  buttons
to select it. Press the ENTER button.
5 Use the  buttons to select
DIGITAL-2 and press ENTER.
The default setting for the DIGITAL-2 jack is CD-R.
6 Use the  buttons to select DVD/
LD and press ENTER.
7 Press the SYSTEM SETUP button.
The receiver exits the setup process.
3
4
5
6
00_VSX-53TX.book Page 12 Monday, April 7, 2003 11:07 PM