Pioneer Elite VSX-53TX - Manual (Page 8)

Before You Start
8
Operating range of remote control unit
The area in which you can use the remote control to operate the VSX-53TX is fairly large. To use, point the remote
control toward the remote sensor on the front panel of this unit while within the range shown below.
Remote control may not function properly if:
• There are obstacles between the remote control and
the remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device emitting infrared
rays.
• Operated simultaneously with another remote control
which uses infrared rays.
Installing the Receiver
Opening the Front Panel
To open the front panel push gently on the lower third of the panel with your finger.
CAUTION!
• Do not cover this unit in any way, for example
with a sheet or piece of cloth. This would
prevent proper heat dispersal.
• Do not any place object directly on top of this
unit. This also would prevent proper heat
dispersal.
• Be sure to leave adequate ventilation space
around the amp! When installing in a rack,
shelf, etc., be sure to leave more than 8
inches of space above the receiver.
8 inches (20 cm)
Receiver
00_VSX-53TX.book Page 8 Monday, April 7, 2003 11:07 PM