Pioneer Elite VSX-53TX - Manual (Page 72)

Using Other Functions
72
Controlling the MULTI ROOM system from the main room
1 Press the MULTI ROOM & SOURCE
ON/OFF button to turn on the MULTI
ROOM system.
The display shown below will illuminate when the receiver
is in STANDBY mode.
Also, the MULTI-ROOM indicator will light.
2 Press the CONTROL button to enter
the control mode.
All operations regarding the sub-room MUST be
made while MULTIROOM appears in the receiver's
display. Once it reverts to its previous display any
adjustments will affect the main room, not the sub
room.
3 Select the source with the MULTI JOG
and adjust the volume.
You can adjust the volume level in the following range:
VARIABLE: –60dB to 0dB
When using the surround back terminal: –80dB to +12dB
FIXED: (cannot be adjusted)
For this example we'll use the DVD/LD function. The
display shown below will illuminate.
The MULTI JOG steps through the functions in the
following order:
4 When in TUNER function, press the
CLASS button and use STATION –/+ to
select the station.
The display will appear as shown below.
Press CONTROL at any time to exit the control mode of
the MULTI ROOM system.
Press MULTI ROOM & SOURCE ON/OFF button at any
time to turn off the MULTI ROOM system.
Memo:
If you don't turn the MULTI ROOM
function off the receiver will not turn off
completely.
4 4 2 1 3
3

The volume doesn’t
appear if you
selected FIXED
11.Using_Other_Functions.fm Page 72 Thursday, April 10, 2003 6:01 PM