Pioneer Elite VSX-53TX - Manual (Page 76)

Using Other Functions
76
4 Repeat step 3 to input multi
operations to the MULTI CONTROL
button you pressed in step 3.
You can repeat this process for up to five commands.
For example: you could enter the following three
operations using the preceding step 3.
1 Press the TV CONT button and TV
 to turn on your TV
(as explained above).
2 Press the DVD/LD button then SOURCE  to turn on
your DVD player (if it is not a PIONEER product).
3 Press the DVD/LD button then  (play) to start playing
the DVD player.
When you employ multi operations (see below), these
three tasks will be performed in the same order.
5 Press the REMOTE SETUP button to
exit the multi operation setup mode.
The remote control return to their previous operation
modes.
Performing Multi Operations
Do the following to use the multi operations.
1 Press the MULTI OPERATION button.
2 Press the MULTI CONTROL button for
the component that has been set up
with multi operations.
The power of the receiver (and any Pioneer components
use in the program) goes on and the programmed multi
operations are performed automatically.
00_VSX-53TX.book Page 76 Monday, April 7, 2003 11:07 PM