Pioneer Elite VSX-53TX - Manual (Page 84)

Fine Tuning Your System
84
12V TRIGGER function
This feature allows you to hook up equipment (for example, a relay device) to this receiver that will send a power
signal automatically when you select the function turned on here (for example, DVD/LD). To use this feature follow
the steps below.
Connect the equipment you want to use with this fea-
ture to the 12V TRIGGER terminal on the back panel.
1 Turn on the receiver and your TV,
press RECEIVER on the remote con-
trol.
2 Press the SYSTEM SETUP button.
3 Looking at the on-screen display on
your TV, use the  buttons to select
12V TRIGGER. Press the ENTER
button.
4 Use the  buttons to select the
component you want to use the 12V
trigger with (for example, DVD/LD).
Press ENTER.
5 Use the  buttons to select the ON
or OFF. Press ENTER.
ON: 12V TRIGGER function is activated.
OFF: 12V TRIGGER function is not activated.
6 Repeat steps 4 and 5 to set 12V
TRIGGER for as many terminals as you
want.
7 Use the  buttons to select EXIT
and press ENTER. EXIT should be
selected (if not, use the
 buttons
to select it). Press ENTER.
This exits the SYSTEM SETUP mode and returns to
normal operation.
Memo:
• Use a mono mini cord to hook up the 12V TRIGGER
equipment.
• DC OUT12V/100mA is the maximum power.
3
4
3-7 2
00_VSX-53TX.book Page 84 Monday, April 7, 2003 11:07 PM