Panasonic AJ-LT85P - Manual (Page 13)

[8] Side Panel Section (for both
VTR1 and VTR2)
Signals conveyed via an internal connection cannot be
adjusted.
q
VIDEO LEVEL control
This is used to adjust the video level of the VTR’s video
output.
w SET UP control
This is used to adjust the set-up level of the VTR’s video
output signals.
e
HUE control
This is used to adjust the hue of the VTR’s video output
signals.
r CHROMA LEVEL control
This is used to adjust the chroma level of the VTR’s video
output signals.
t SYSTEM controls
H: This is used to adjust the system phase in SC period
increments.
SC FINE: This is used to adjust the SCH phase only; the
SC phase is changed (the H phase remains
unchanged).
SC COARSE: This is used to adjust the SCH phase in
90-degree increments (the H phase
remains unchanged).
[9] Front Section
q Headphone jack (Mini stereo)
• When the headphones are plugged into this jack, the
sound will no longer be heard through the built-in speaker.
• Adjust the headphones output level using the LEVEL
control in the LCD monitor section.
[10] Top Section
w VTR operation display LED
This indicator allows the user to check the operation sta-
tus of the VTR even when the display is closed.
Off:
Lights:
Flashes (at approx. 1-second intervals):
Indicates that a tape is traveling in one of the
VTRs.
Flashes (at approx. 0.5-second intervals):
Indicates that tapes are traveling in both of the
VTRs.
Flashes (at approx. 0.25-second intervals):
Indicates the auto OFF status.
CONTROLS AND THEIR FUNCTIONS
13
Controls
and
their
functions
VIDEO
LEVEL SET UP HUE CHROMA
LEVEL
H FINE COARSE
SYSTEM SC
1 2 3 4 5
Indicates the power OFF status.
Indicates that the power is on and the tape is
stopped.
HEADPHONES