Panasonic AJ-LT85P - Manual (Page 24)

OPERATION
Item Setting
Description of setting
No. Item No. Item
100 SHTL MAX 0000 X16
0001 X32 ™ ™
101 FF.REW 0000 X32
MAX 0001 X60
™ ™
102 AUDIO 0000 OFF
MUTE 0001 ON
™ ™
103 S/F/R/ EE 0000 EE
SEL 0001 TAPE
™
104 STOP MODE 0000 REC
0001 PB
™
105 VTR1 IN 0000 V1 IN
SEL 0001 V2 V+A
0002 V2 V
™
0003 V2 A
106 FORMAT 0000 DVCPRO
SEL 0001 DV
™ ™
0002 DVCAM
107 POSTROLL 0000 0.5s
SEL 0001 1s
0002 2s
™
0003 3s
The underlined number and item are the factory settings.
24
V V
T T
R R
1 2
This sets the maximum speed in the shuttle mode.
0: 16 times normal tape speed.
1: 32 times normal tape speed.
This sets the maximum fast forward and rewind speed.
0: 32 times normal tape speed.
1: 60 times normal tape speed.
<Note>
With the DV format, this speed is 32X normal tape speed regardless of this
setting.
This sets the status while audio signals are output when the mode has
changed from STOP or search to PLAY.
0: The time taken until the sound is output is reduced.
1: The sound is output after the mode is fully established.
This sets whether to establish the EE mode or VV mode when the laptop is in
the STOP, FF or REW mode.
0: EE mode is established.
1: VV mode is established.
This selects the mode when VTR1 is in the STOP mode.
0: The digital circuits serve as the REC system. The time taken entering REC
mode is reduced.
1: The digital circuits serve as the PB system. The time taken entering PB
mode is reduced.
Selects whether V1 IN or V2 IN is to be used for the VIDEO/AUDIO input of
VTR1.
0: VTR1 IN serves as the VTR1 input.
1: VIDEO IN and AUDIO IN of VTR2 serve as the VTR1 input.
2: VIDEO IN of VTR2 and AUDIO IN of VTR1 serve as the VTR1 input.
3: VIDEO IN of VTR1 and AUDIO IN of VTR2 serve as the VTR1 input.
This selects the format when an L size cassette is used.
0: DVCPRO mode
1: DV mode
2: DVCAM mode
Selects the postroll time (in 1-second increments).
0: 0.5 sec.
1: 1 sec.
2: 2 sec.
3: 3 sec.
DETAILED DESCRIPTION OF SET-UP MENUS