Panasonic AJ-LT85P - Manual (Page 74)

GENERAL
Rating input: DC 12V 8.5A
SPECIFICATIONS
74
Recording format:
Recording tracks
Tape speed:
Recording time:
Tape used:
FF/REW time:
Editing accuracy:
Tape timer accuracy:
Servo lock time:
Ambient operating temperature:
Ambient operating humidity:
Dimensions:
Weight:
DVCPRO
Digital video
Time code; Recorded in sub-code area
Digital audio; 2 channels
Cue signal; 1 track
Control (CTL); 1 track
33.820 mm/sec.
126 min. (with AJ-P126LP tape)
66 min. (with AJ-P66MP tape)
1/4" thin magnetic layer metal tape
Less than 3.5 min. (with AJ-P126LP tape)
±
0 frame (with time code)
±
2 frame (per event when continuous CTL signal is used)
Less than 0.5 sec.
41
°
F to 104
°
F (5
°
C to 40
°
C)
10% to 85% (no condensation)
16-3/4" (W)
4-3/4" (H) 17-1/4" (D) (424 120 435 mm)
25.74 lb (11.7 kg)
DIGITAL
Sampling frequency:
Quantization:
Error correction:
Y; 13.5 MHz,
P
B /P R ; 3.375 MHz
8 bits
Reed-Solomon codes
ANALOG COMPOSITE IN/OUT
Video band range:
DG:
DP:
Y/C delay:
K factor:
Analog composite input:
REF video input:
Analog composite output:
Monitor output: Y; 30 Hz – 4.5 MHz (
±
1dB)
Less than 6%
Less than 4.5
°
Less than 20 nsec
Less than 2%
BNC
2 (VTR1, VTR2), 75 ohms
BNC 2 (loop-through), 75 ohms, automatic
BNC 2 (VTR1, VTR2), 75 ohms
BNC 2 (VTR1, VTR2), 75 ohms, superimpose ON/OFF
VIDEO OUTPUT SIGNAL
Video gain:
Chroma gain:
Hue:
Set up:
H phase:
SC phase (COARSE):
SC phase (FINE): More than
±
3dB
More than
±
3dB
More than
±
25
°
±
10 IRE
More than
±
1.5
µ
sec
360
°
90
°
ANALOG COMPONENT OUT (during playback of standard recording tape)
Video band:
Analog component output:
Y; 30 Hz – 5.5 MHz (
±
1 dB)
P B , P R ; 30 Hz – 1.3 MHz (
±
1.5 dB)
BNC 6 (Y, P B , P R , VTR1, VTR2), 75 ohms
Y connector is switched with the analog composite
output connector.
VIDEO