Panasonic KX WP1050 - Manual (Page 148)

Base Unit Settings
148 For assistance, please visit http://www.panasonic.com/help
3
To add a new entry, click the entry number with blank fields under the Profiles heading.
L
The Connection Mode page is displayed.
4
Click the desired Internet connection mode under the Mode column.
L
The configuration page is displayed (page 48).
5
Configure the Internet connection mode you select in step 4, then click [Save].
L See “Configuring the Internet connection settings” on page 48.
L The new profile is registered and displayed under the Profiles headings.
6
Click the pull-down menu and select the desired profile under the Profile Selection
heading, then click [Save].
7
Click [Restart].
L
The base unit automatically restarts and the Top Menu is displayed.
Setting Description
Home Mode
L
Select a profile to use when Mode selector is at
“HOME”.
L
Profile No.1 is used only for HOME Mode.
Hotel Mode L Select a profile to use when Mode select is at
“HOTEL”.
L
Profile No.2 is used only for HOTEL Mode.
WP1050.book Page 148 Wednesday, April 25, 2007 6:01 PM