Panasonic KX WP1050 - Manual (Page 63)

Getting Started
For assistance, please visit http://www.panasonic.com/help 63
Turning on the handset (Signing in to Skype)
To use the handset, you need a Skype account and need to connect to a network and sign
in to Skype. If you do not have a Skype account, you can create it using the handset (page
65).
Starting up for the first time
1
Press and hold { } }
for 2 seconds to turn on the handset.
2
Read the entire Skype agreement. i {Yes}
L
The handset starts searching for available networks in
range.
L If the network list is displayed, select the desired network
and press {Connect}.
L
When the network list is not displayed, the handset
automatically connects to the base unit.
3
After a network connection is complete, select “Sign in to
Skype
” if you already have a Skype account. i {Select}
L To create a new account, see “Creating a new account” on page 65.
4
Enter your Skype name. i {OK}
5
Enter your password. i {OK}
6
Press {Yes} or {No} to decide whether to sign in automatically from the next time on.
L
The Idle screen appears (page 66).
Note:
L
You can refer to these instructions again when you start up the handset after you reset
the handset. For resetting the handset, see page 123 for details.
L
In step 2, you can connect to specific networks that require you to select security type
and enter the network key. See “To connect to a wireless network that is found in range:”
on page 108 or “To connect to a wireless network that is not found in range:” on page
110.
L In step 2, you can also connect to open networks. When connecting to open networks,
a display prompt appears to confirm whether you want to connect or not. See “Auto-
connect to open networks list” on page 116.
L For text entry, see page 60 for details.
WP1050.book Page 63 Wednesday, April 25, 2007 6:01 PM