POSIFLEX Business Machines SPEECHEXEC 4.3 - Manual (Page 5)

5
Quick reference guide
E
N
G
LIS
H
2 Installation
2.1 Requirements
Recommended: Pentium III, 500MHz and 512 MB RAM (1 GB RAM for Vista) •
60 MB hard disk space for SpeechExec, 100 MB for Microsoft .NET 1.1 Framework •
1 free USB port, 1 self-powered USB port for the foot control •
Recommended minimum transfer rate for LAN: 100 Mbit/s •
Windows Vista, Windows XP (with Service Pack 2), Windows 2000 (with Service Pack 4) •
D Note: For all operating systems, it is recommended that the latest Service Pack available be
installed before installing SpeechExec.
2.2 Hardware installation
Turn on the PC. 1
Connect the USB dongle to a free USB port. 2
Plug the headphones into the 3 socket and the foot control into a free USB port.
4 Connect the USB plug of the Digital Pocket Memo to a free USB port or the port of the USB
dongle.
The
5 New Hardware Found message of Windows is displayed and installation will proceed
automatically.
Restart the PC when prompted by Windows.
6
D Note: If the message does not appear, verify if the USB port is enabled in the BIOS of your
system. See the hardware documentation for details or contact your hardware vendor.
2.3 Software installation
Insert the installation CD for SpeechExec Pro Transcribe in the CD-ROM drive. The set-up 1
program should start automatically. If it does not, open the CD contents in Windows
Explorer and double-click the autorun.exe file.
Click the
2 Install button.
Follow the on-screen instructions of the set-up program to install SpeechExec Pro Transcribe 3
on the PC.
C Important: Administrator rights are required to install the software. For more help, contact
your administrator.
PRO