Pioneer BDP-320 User Manual
Page 59
59
En
07
Sound and
picture are not
synch
ronized.
Is
Output Terminal properly
set?
Set
Output Terminal properly (pages 19 and 46).
Is
Lip Sync properly set?
Adjust the amount of audio delay with the
Lip Sync setting (page 36).
• No sound is out
put.
• Sound is not out
put
properly.
Is the disc
played back in
slow motion?
Is the disc
played back in fast
fo
rward or fast reverse?
No sound is out
put during slow motion play and forward and reverse
scanning.
A
re the audio cables properly
connected?
• Connect the cable
properly according to the connected devices
(
• Inse
rt the cable firmly and all the way in.
Is the audio cable damaged? If the cable is damaged,
replace it with a new one.
A
re the connected
com
ponents (AV receiver or
am
plifier, etc.) properly set?
Read the o
perating instructions of the connected components and
check the volume, in
put, speaker settings, etc.
A
re you trying to listen to the
sound of the
HDMI OUT
te
rminal while watching the
picture from the
COMPONENT VIDEO or
VIDEO output terminals?
Audio signals a
re not output from the
HDMI OUT terminal when video
signals a
re being output from the
COMPONENT VIDEO or VIDEO
out
put terminals. When watching the picture of the
COMPONENT
VIDEO or VIDEO output terminals, connect an optical digital audio
cable o
r regular audio cables to listen to the sound (page 16). Once
connections a
re completed, use
Setup Navigator to make the player’s
settings (
Is
HDMI Audio Out properly
set?
Set
HDMI Audio Out to Auto or PCM. (page 39).
Is
Output Terminal properly
set?
When
ANALOG AUDIO is selected at Output Terminal, no audio
signals a
re output from the
HDMI OUT or DIGITAL OUT terminal
(
Is the out
put video resolution
properly set?
Use
OUTPUT RESOLUTION to switch to the resolution at which the
video and audio signals a
re output (page 22).
Is the AV
receiver or
am
plifier, etc., connected to
the
AUDIO OUT terminals?
To listen to 2-channel analog audio, connect to
FRONT (L/R) of the
AUDIO OUT terminals (page 13) and set Audio Output Mode to 2
Channel (page 38).
A
re the speakers properly
set?
When the AV
receiver or amplifier, etc., is connected to the
AUDIO
OUT terminals and Audio Output Mode is set to Multi-channel, set
Speaker Setup properly (page 42).
Is a DVI device connected?
The sound will not be out
put from the
HDMI OUT terminal if a DVI
device is connected. Connect the device to a
DIGITAL OUT terminal or
the
AUDIO OUT terminals (page 16).
A
re you playing a DTS-CD?
To out
put the sound of DTS-CDs from the
HDMI OUT terminal, set
HDMI Audio Out to PCM (page 39).
Fo
r some BDs, audio signals are only output from
DIGITAL OUT
te
rminal or the
HDMI OUT terminal.
Multi-channel sound is not
out
put.
Is
Output Terminal properly
set?
Linea
r PCM (2-channel) audio signals are output from output terminals
othe
r than the one set at
Output Terminal under Audio Out. Set
Output Terminal properly (page 46).
Is the audio out
put of the
connected AV
receiver or
am
plifier, etc., properly set?
Read the o
perating instructions of the connected AV receiver or
am
plifier and check the audio output settings of AV receiver or
am
plifier.
Is multi-channel sound
selected?
Use the menu sc
reen or
AUDIO to switch the disc’s sound to multi-
channel.
Is the AV
receiver or
am
plifier, etc., connected to
the
AUDIO OUT terminals?
When the AV
receiver or amplifier, etc., is connected to the
AUDIO
OUT terminals, set Audio Output Mode to Multi-channel (page 38).
Also, set
Speaker Setup properly (page 42).
Noise can be hea
rd when
out
putting DTS Digital
Su
rround signals from the
DIGITAL OUT terminal.
Is the connected AV
receiver
o
r amplifier compatible with
DTS Digital Su
rround?
If an AV
receiver or amplifier that is not compatible with DTS Digital
Su
rround is connected to the
DIGITAL OUT terminal, set DTS Out to
DTS
PCM (page 38).
Problem
Check
Remedy
320_UXJCA_EN.book 59 ページ ２００９年２月１３日 金曜日 午後４時２６分