Pioneer VSX-27TX - Manual (Page 29)

29
SET
UP
Surround Sound Set Up
Channel Level
The following steps show you how to balance the sound output level of your speakers. Proper speaker balance is
essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If starting fresh,
complete steps 1-3 in “Setting Up for Surround Sound“ (p.24) first.
1
Select CHANNEL LEVEL (if continuing from
CHANNEL DELAY, it will already be selected).
See “Setting Up for Surround Sound“ on page 24 if you are
unsure how to do this.
Press ENTER.
2
Select aTEST TONE mode.
1 Press 2 or 3 to move the hand to AUTO or MANU.
2 Press ∞ button to select SETTING START.
AUTO (automatic TEST TONE)
This mode switches the test tone between each speaker
automatically. Use this mode when balancing the speaker levels
by ear.
The automatic test tone is output in the following order :
MANUAL (manual TEST TONE)
This mode lets you switch the test tone between each speaker
manually. You can use this mode when you want to balance the
speaker levels by ear at a more leisurely pace.
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0 ENTER
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
1,2
Channel Level
Test Tone [ AUTO ]
[ Setting Start ]
[EXIT]
FL CT FR
SR SL SW