Pioneer VSX-27TX - Manual (Page 69)

69
SET UP
OPERA
TION
OPERA
TION
Using Other Functions
Using the front panel (27TX/26TX) with the MULTI-ROOM system
1
Press the MULTI ROOM & SOURCE button.
The display shown below will illuminate when the receiver is in
STANDBY mode.
Also, the MR&S button will light.
2
Press the CONTROL button.
The light will start to blink.
3
Within ten seconds of step 2, select the FUNCTION with
the INPUT SELECTOR.
For this example we'll use the TUNER function. The display shown
below will illuminate.
4
Press the CONTROL button again and use the INPUT
SELECTOR to adjust the VOLUME. The volume can be
adjusted in a range of -82dB to 0dB.
The display will appear as shown below.
5
When in TUNER function, press the CONTROL button
and use the INPUT SELECTOR to tune in the station.
The display will appear as shown below.
MULTI-ROOM
& SOURCE
INPUT SELECTOR
MASTER
VOLUME
MIN MAX
FL MMER
APE 2 NITOR
CLASS FM/AM
TUNER CONTROL
MEMRY MPX
- TUNING +
- STATION +
CONTROL
CD MD/TAPE1 TUNER PHONO
TUNER MD/TAPE 1 VCR 1
TV/SAT DVD/LD CD
1 2 3,4,5
«
The INPUT SELECTOR steps through the functions in the following
order:
memo If you don't turn the multi room
function off you won't be able
to turn the entire system off.
Turn the input selector until you get: