Pioneer VSX-27TX - Manual (Page 31)

31
SET
UP
Surround Sound Set Up
Crossover Network
The following steps show you how to adjust the crossover network. The crossover network is the frequency at which
the system divides the signal and sends the different parts (high ,mid, low) to different speakers. Speaking precisely,
this setting sets the cutoff point for the bass frequencies rerouted from your SMALL speakers to your sub woofer or
speakers set to LARGE. If continuing from CHANNEL LEVEL go to step 1. If starting fresh, complete steps 1-3 in
“Setting Up for Surround Sound“ (p.24) first.
1
Select CROSSOVER NETWORK (if continuing from
CHANNEL LEVEL, it will already be selected).
See "Setting Up for Surround Sound" on page 24 if you are
unsure how to do this.
Press ENTER.
2
Specify the crossover frequency for your small
speakers.
Setting speakers to SMALL in “SPEAKER SETTING“ sends the
respective channel's bass frequencies to the sub woofer (or
LARGE speakers). The present function lets you determine
which frequencies will be sent to the sub woofer or LARGE
speakers.
1 Press
2 or 3 to move the hand to 80 Hz, 100 Hz, or
150 Hz.
2 Press ∞.
80 Hz
Sends bass frequencies below 80 Hz to the sub woofer (or
LARGE speakers).
100 Hz
Sends bass frequencies below 100 Hz to the sub woofer (or
LARGE speakers).
150 Hz
Sends bass frequencies below 150 Hz to the sub woofer (or
LARGE speakers).
As noted on your TV screen the THX setting is 80. Select this
setting if you have THX approved SMALL speakers.
Experiment with the different settings to see which sounds best
to you.
3
Select EXIT to return to the SYSTEM SETUP MENU.
Next, proceed to BASS PEAK LEVEL MANAGER below.
If you want to change a setting before proceeding
Select a new crossover frequency.
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0 ENTER
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
Crossover Network
Frequency [ 80Hz ]
(THX Speaker = 80Hz)
[EXIT]
1-3
The default setting is 80 Hz.
memo