Pioneer VSX-27TX - Manual (Page 65)

65
SET UP
OPERA
TION
OPERA
TION
Setting up the direct function
The direct function is designed in case you have an external video source connected to your TV (a video source that is
not going through the VSX-27TX/26TX/24TX). For this explanation we'll call this the "external video deck." You'd like to
control the external video deck with this unit's remote control so you've assigned it a function button (for example
purposes, the VCR 2 button). Yet, if you put the receiver in VCR 2 mode you'll get no picture on your TV because the
external video deck signal is not going through the VSX-27TX/26TX/24TX. To get around this problem you set the
DIRECT FUNCTION for VCR 2 to OFF. Now when you press VCR 2 function button you can control the external video
deck with the remote but the receiver does not go into VCR 2 mode.
1
Press REMOTE SETUP and 4 at the same time
to select the DIRECT FUNCTION mode.
The MULTI CONTROL buttons DVD/LD, TV/SAT, VCR 1, VCR
2, CD, and MD/TAPE 1 start to blink.
2
Select a component by pressing it's MULTI
CONTROL button.
3
Set the DIRECT FUNCTION of each external
source to NO by pressing 2 .
4
Press REMOTE SETUP to exit the DIRECT
FUNCTION mode.
Remote Back Light
This function is useful for using the unit in a dark room.
1
Press and hold both REMOTE SETUP and 5 .
The remote back light strength cycles in the following order :
Using Other Functions
3 3 3 MAX OFF MID
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0 ENTER
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
1,4
1
2
Direct Function
You can choose whether
the commander sends a
function code or not ,
when you press each
Multi-control button.
1 Select function.
2 Input YES or NO.
TRANSMIT YES = 1
NO = 2
EXIT = Remote setup
memo
The default setting is MAX.
memo The default setting is all YES. If you have turned a
DIRECT FUNCTION to NO and want to turn it back to
YES, follow the directions above and press 1
in step 3.
3
TV VOL
TV FUNC
MENU
ENTER
STEREO DSP
THX
/dts
MUTE
TV
VOLUME
CHANNEL DTV ON/OFF DTV MENU
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
1 2 3
4 5 6
7 8 9
0 ENTER
+
1
1