Pioneer VSX-27TX - Manual (Page 60)

60
Recording from Audio Components
The following explanations show you how to record an analog audio signal with the component you connected to the
MD/TAPE 1 or TAPE 2 MONITOR jacks. Note that you cannot record an component that is only connected digitally. If you
want to record from a digital component it must be connected in an analog manner as well. If you want to record a
digital signal see the next page.
1
Select the source component and put the receiver in
that function. Remember, SIGNAL SELECT must be
set to analog.
Press the SIGNAL SELECT button on the remote control (or use
the button on the front panel) and choose ANALOG. Recording
DIGITAL or AC-3 RF (VSX-27TX only) signals is not possible.
2
Start recording with a TAPE or MD (etc.).
3
Playback the source to be recorded.
Record monitor (TAPE 2 MONITOR)
If you connect a cassette deck (etc.) with a record monitor function to
the TAPE 2 MONITOR jacks, you can listen to the sound of the
recording as it is recorded.
Press TAPE 2 MONITOR to switch between the sound of
the recording (TAPE 2 indicator on) and the sound of the
source component (TAPE 2 indicator off).
Using Other Functions
memo The receiver's volume, channel level, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no
effect on the recorded signal and the EXTERNAL 5.1 CH input cannot be recorded.
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0 ENTER
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
1