Pioneer VSX-27TX - Manual (Page 7)

7
OPERA
TION
SET
UP
PREP
ARA
TION
Before You Start
Installing the Receiver
Please note:
• Do not place objects directly on top of this unit. This would prevent proper heat dispersal.
• When installing in a rack, shelf, etc., be sure to leave more than 8 inches of space above the receiver.
8 inches (20 cm.)
Receiver
Operating range of remote control unit
The area in which you can use the remote control to operate the VSX-27TX/26TX/24TX is fairly large. To use, point the
remote control toward the remote sensor on the front panel of this unit while within the range shown below.
Remote control may not function properly if :
• There are obstacles between the remote
control and the remote sensor.
• Direct sunlight or fluorescent light is shining
onto the remote sensor.
• The receiver located near a device emitting
infrared rays.
• Operated simultaneously with another
remote control which uses infrared rays.
memo
30
30
23 feet (7m)
Opening the Front Panel
To open the front panel push gently on the lower third of the panel with your finger.